Back to Articles

Delmar Completes 2012 Arctic Campaign

Delmar Systems, Inc. recently completed the 2012 mooring services campaign for Shell Exploration’s two moored drilling rigs, the Kulluk and Noble Discoverer, in both the Beaufort and Chukcki Seas off the northern coast of Alaska.

In early 2012, Louisiana-based Delmar Systems was awarded an EPCI (engineering, procurement, construction, and installation) contract by Shell Alaska for various facets of the mooring operation including detailed mooring system engineering and design, procurement, and construction and installation of the Kulluk’s 12-leg mooring system and the Noble Discoverer’s 8-leg mooring system. Delmar was responsible for overall project management, coordination, and logistics planning to stage the required mooring hardware and preset mooring system installation during the summer drilling program.

Delmar technical and operational personnel worked jointly with Shell’s technical personnel to design a mooring system capable of operating in the Arctic's most challenging conditions. Delmar’s innovative mooring design and mooring system greatly enhanced Shell’s ability to moor and unmoor quickly as weather and ice flow conditions dictated. In addition, Delmar coordinated the procurement, shipping, and staging of all required components for dockside delivery to Port Everett, WA and ultimate mobilization to the North Slope for the anticipated July offshore installation.

Ice and weather conditions always present challenges to offshore operations. Delmar worked alongside many other third party service providers, including an upgraded winterized vessel fleet, sophisticated ice and weather forecasting, and survey personnel to overcome these challenges in this remote environment.

An important priority was assuring the safety of all personnel during mooring and vessel operations with the highest regard for the offshore Arctic environment. Delmar performed all operations without incident during the entire summer season.

Delmar Systems, Inc. is a leading supplier of offshore mooring-related services including engineering design, mooring analysis, project management, planning, operational installation, and mooring equipment services, providing the safest and most efficient mooring services available to the offshore industry since 1968.

Press Release Archive (2000–2011)



Publications

"Mooring System Considerations for Renewable Energy Standards," Offshore Technology Conference, May 2017

"Improving Reliability of MODU Mooring Sysdtems Through Better Design Standards and Practices," Offshore Technology Conference, May 2017

"Saving Rig Time and Mitigating Risk Through 'Quick-Release' Mooring Systems," SNAME 2017 Offshore Symposium, February 2017

"The Mooring Disconnect," Oilfield Technology, January 2017

"Cut Tail and Run," Oilfield Technology, January 2016

"Cutting out the Consequences," Oilfield Technology, January 2015

"Serpentina FPSO Mooring Integrity Issues and System Replacment: Unique Fast Track Approach," Offshore Technology Conference, May 2014

"Subsea Cap & Contain Method for a Deepwater Tension Leg Platform," SPE/IADC Drilling Conference and Exhibition, Amersterdam, The Netherlands, 5–7 March 2013

"Mitigating Risk in Shallow Water and Arctic Station-Keeping," SNAME 2013 Offshore Symposium, February 2013

"DP Vessel Passive Quick Release Contingency Mooring Systems," SNAME 2012 Offshore Symposium, Houston, TX 

"WHO DAT Project - Polyester Mooring System Design, Analysis, and Installation," Offshore Technology Conference, May 2012

"DP Vessel Passive Quick Release Contingency Mooring Systems," SNAME 2012 Offshore Symposium, February 2012 

"Who Dat initiates production in GoM in post-Macondo era", Offshore, December 2011

"Capturing the True Non-Linear Load-Elongation Properties (Including Permanent Elongation) of Polyester Rope in Mooring Analyses," Offshore Technology Conference Brasil, October 2011

"Installation Penetration of Gravity Installed Plate Anchors - Laboratory Study Results and Field History Data," Offshore Technology Conference Brasil, October 2011

"Synthetic 'Mud Ropes' for Offshore Mooring Applications - Field History and Testing Data,"  September 2011

"Unique small-footprint anchor handles extreme out-of-plane loading in high-uplift conditions", E&P Magazine, June 2010

"Fiber Moorings, Recent Experiences and Research: Fiber Rope Mooring Assessment - Original API RP 2SM Piecewise Linear Stiffness versus Non-linear Stiffness with Integrated Permanent Rope Elongation," Offshore Technology Conference, May 2010

Billy Bergeron Named "Industry Icon" by E&P Magazine, May 2010

"Alternative synthetic component validated for MODU mooring in hurricane conditions", Offshore Magazine, January 2010

"MODU Anchor-Soil Impact on Non-Stationary Anchor Performance," Offshore Technology Conference, May 2009

"Efficient Gravity Installed Anchor for Deepwater Mooring," Offshore Technology Conference, May 2009

"Sizing up Tree Planting", Offshore Engineer, August 2008

"OMNI-Max Anchor Development and Technology," MTS Oceans, 2007

"Subsea Equipment Installations Utilizing Anchor Handling Vessels", Deepwater Technology. October 2003.