Back to Articles

Delmar Releases Australian First Risk Assessment Software

Australian First Risk Assessment Software

Delmar is answering the call for better risk assessment software in Australia with the launch of ConStatAU™.

This new technology allows operators to better understand and potentially avoid risks offshore.

The ConStat risk assessment software is an automated program that allows operators to survey up to 190 km from their location for any possible risk factors including pipelines, wells, surface facilities, and environmental sites.

Using historical storm data, it highlights possible drift directions and seasonal probabilities to produce a detailed potential risk profile. ConStat is the industry standard risk assessment program for all US drilling and is expanding world-wide, starting with Australia.

The new software meets government standards for risk assessment, a key consideration in the awarding of offshore contracts. 

The introduction of ConStatAU represents a significant step forward for Delmar, which has a history of producing major innovations and technological advances in the offshore industry for more than 47 years. 

Delmar has provided mooring and subsea installation services to every oil and gas region around the globe, with offices strategically located to serve the offshore industry's most challenging environments.


Press Release Archive (2000–2011)



Publications

"Mooring System Considerations for Renewable Energy Standards," Offshore Technology Conference, May 2017

"Improving Reliability of MODU Mooring Sysdtems Through Better Design Standards and Practices," Offshore Technology Conference, May 2017

"Saving Rig Time and Mitigating Risk Through 'Quick-Release' Mooring Systems," SNAME 2017 Offshore Symposium, February 2017

"The Mooring Disconnect," Oilfield Technology, January 2017

"Cut Tail and Run," Oilfield Technology, January 2016

"Cutting out the Consequences," Oilfield Technology, January 2015

"Serpentina FPSO Mooring Integrity Issues and System Replacment: Unique Fast Track Approach," Offshore Technology Conference, May 2014

"Subsea Cap & Contain Method for a Deepwater Tension Leg Platform," SPE/IADC Drilling Conference and Exhibition, Amersterdam, The Netherlands, 5–7 March 2013

"Mitigating Risk in Shallow Water and Arctic Station-Keeping," SNAME 2013 Offshore Symposium, February 2013

"DP Vessel Passive Quick Release Contingency Mooring Systems," SNAME 2012 Offshore Symposium, Houston, TX 

"WHO DAT Project - Polyester Mooring System Design, Analysis, and Installation," Offshore Technology Conference, May 2012

"DP Vessel Passive Quick Release Contingency Mooring Systems," SNAME 2012 Offshore Symposium, February 2012 

"Who Dat initiates production in GoM in post-Macondo era", Offshore, December 2011

"Capturing the True Non-Linear Load-Elongation Properties (Including Permanent Elongation) of Polyester Rope in Mooring Analyses," Offshore Technology Conference Brasil, October 2011

"Installation Penetration of Gravity Installed Plate Anchors - Laboratory Study Results and Field History Data," Offshore Technology Conference Brasil, October 2011

"Synthetic 'Mud Ropes' for Offshore Mooring Applications - Field History and Testing Data,"  September 2011

"Unique small-footprint anchor handles extreme out-of-plane loading in high-uplift conditions", E&P Magazine, June 2010

"Fiber Moorings, Recent Experiences and Research: Fiber Rope Mooring Assessment - Original API RP 2SM Piecewise Linear Stiffness versus Non-linear Stiffness with Integrated Permanent Rope Elongation," Offshore Technology Conference, May 2010

Billy Bergeron Named "Industry Icon" by E&P Magazine, May 2010

"Alternative synthetic component validated for MODU mooring in hurricane conditions", Offshore Magazine, January 2010

"MODU Anchor-Soil Impact on Non-Stationary Anchor Performance," Offshore Technology Conference, May 2009

"Efficient Gravity Installed Anchor for Deepwater Mooring," Offshore Technology Conference, May 2009

"Sizing up Tree Planting", Offshore Engineer, August 2008

"OMNI-Max Anchor Development and Technology," MTS Oceans, 2007

"Subsea Equipment Installations Utilizing Anchor Handling Vessels", Deepwater Technology. October 2003.